Today, manufacturing companies continue to grow rapidly. With the gradual expansion of the demand for wooden box packaging, coupled with the advantages of convenient sampling, relatively simple processing technology, and recycling. However, you should know the loading and shipping of fragile items, but you can’t joke. If you are not careful, it is very likely to cause damage to the goods. The following are some precautions for mastering the wooden box packaging of mechanical equipment: 1. According to the relative height of the foot of the equipment, use wood pads or screws to fix the equipment and the foot surface to create a certain whole, and screws or big nails connect the pad and the base to make it a whole, and then put the equipment into the corresponding part of the base, Fix the surrounding and fix it with nails, so that the machine is not easy to move up and down. 2. For the machinery and equipment that must be packed with high precision, according to the net weight of the machinery and equipment, use a 10mm rubber liner, and after the pallet is paved with pearl cotton, place the machinery and equipment on it, wrap it with aluminum-plastic film, and then vacuum-pack it. Then, the machine equipment is fixed on the wooden board in the form of 1 above. 3. If there are fragile parts such as instrument panel laminated glass on the device, use filling material or sponge bubble pad to pull off the protective film, so that damage and scratches are unlikely to occur during transportation. The machine equipment is wrapped with bubble pad, and the machine equipment and wooden box packing base are tightened with galvanized iron and cloth strips. 4. When encountering the outer packaging of heavy machinery and equipment, to avoid serious deformation of the base and the wall during hoisting, channel steel and flat iron are used to connect each other. For vacuum packaging bags, the tip of the equipment should not be exposed, otherwise the vacuum packaging bags will cause cracks under strong working pressure, and the actual effect of the vacuum pump cannot be achieved. Add rubber seals and moisture-proof agents. 5. The whole process of packaging: the equipment and parts are checked accurately, the customer’s permission is obtained, the wooden box packaging board wall is assembled in sequence, and the reed board is sealed. 6. After all the outer packaging procedures are completed, the common signs of packaging wooden boxes, such as “waterproof and easy to break”, “center of gravity” and “hoisting parts”, are sprayed on the wooden box packaging board wall.
Post time: Jul-01-2022