In order to remove moisture, there must be heat around the wood, which is usually the heat source of heat

In order to remove moisture, there must be heat around the wood, which is usually the heat source of heat. At a certain temperature, water is discharged into the surrounding air through transpiration or exultation, which makes the wood dry. When the moisture drops to a certain level, we can use it to process and manufacture the required products. The fumigation free wooden box can be disassembled without damaging the integrity of the components, and can be reused.
(1) With the increase of temperature and water pressure, the transpiration rate is accelerated and the viscosity is reduced, which promotes the flow and dispersion of water. However, if the temperature is too high, it is easy to crack and deform, which should be controlled properly. Wooden cases should be protected from moisture and exposure. The temperature and humidity of the storage environment should be strictly controlled to prevent the goods from being affected. In fact, after the cation and anion are soaked in turn, the inorganic reaction occurs with the wood in the wood vacancy, and the wood vacancy is added by the generated water-insoluble salt, which can effectively prevent the thermal differentiation, aging and insect corrosion of the wood due to heat. Because the wood structure is changed, the wood hardness can be improved.
(2) When the temperature and velocity of air flow are the same, the higher the humidity, the higher the partial pressure of water vapor and the more transpiration. The lower the boring speed; When the humidity is low, water transpiration. The surface moisture is reduced, the moisture gradient is added, and the water is dispersed and added, which is boring and fast. However, if the humidity is too low, it will be boring and even worse, such as honeycomb. Because the density of wooden materials is not high and they are easily damaged by pressure during transportation, it is necessary to compact the surface of wooden box packaging. According to the characteristics that wood can become soft under the action of water and heat, soak water into wood and compact the surface of wooden box packaging through hot pressing.
(3) The high-speed air flow can damage the saturated vapor boundary layer on the surface of the wooden tray and accelerate the drying speed. Water movement determines the rate of boredom, but the gradient of water content will add, and boredom will add. Risk of shortcomings.
Therefore, the data does not require high-speed media circulation. Under vacuum conditions, trace gas is continuously supplied, and the plasma generated by discharge will combine or aggregate into gas molecules on the surface of wood, which can effectively improve the coloring and dyeing of wood surface and improve the moisture-proof and anti-corrosion ability of wooden box.
After the plastic resin composite treatment, the hardness and strength of wood will advance significantly, and the wear resistance and surface gloss will also advance. After being made into a wooden box, the wear resistance will be stronger and the service time will be longer. After the treatment, it can not only save many raw materials, but also protect forest resources.